Configuration Plugin

These features are part of the utilities plugin.

Description

The purpose of this plugin is to provide mechanism, to update node’s (or group of nodes) runtime configuration which is represented by runtime properties. Runtime properties reflect “the state” of the given node instance. If we change them - we change “the state” of the node instance. This is neccessary when we need to make some changes in deployment - for instance, we need to change DNS server name in all CPE’s represented by given deployment.

Configuration plugin is also addressing more complex scenario, where we can selectively provide & update configuration on given node instances. For example, node instance may contain “global” configuration (the same of all node instances) and in case of vCPE it may be DNS and NTP servers, however it may also contain node instance specific configuration like loopback IP address.

Configuration plugin can be used in combination with other plugins like terminal plugin or netconf plugin providing powerful capability to provision physical endpoints.

This plugin does not currently have a configuration_rollback workflow.

Blueprint

Configration plugin requires two components in a blueprint:

node type “configuration_loader” - node which holds configuration for node instances under key “params” in its runtime properties. We pass configuration through “parameters_json” key. Once node is instantiated, plugin populates key “params” with content provided in “parameters_json”.
relationship “load_from_config” - relationship which is applied to node which needs configuration and is responsible for sourcing configuration from “configuration_loader” type to node instance “params” key. Very important is key “params_list” in “properties”. This is configuration selector which decides, which keys should be pulled from “configuration_loader” properites. We may decide here, which configuration items are global and local. In example below, “global_config” key is being populated to cpe1 & cpe2 node instances, whereby each cpe have own loopback IP.
```
node_templates:

config_holder:
type: configuration_loader
properties:
  parameters_json: { get_input: cpe_configuration }

cpe1:
type: cloudify.nodes.Cpe
properties:
  params_list:
    - global_config
    - loopback_1
relationships:
  - type: load_from_config
    target: config_holder

cpe2:
type: cloudify.nodes.Cpe
properties:
  params_list:
    - global_config
    - loopback_2
relationships:
  - type: load_from_config
    target: config_holder
```

Input file for above blueprint:

cpe_configuration:
  global_config:
    ntp: "ntp-global"
    dns: "dns-global"
  loopback_1: "1.1.1.1"
  loopback_2: "2.2.2.2"
  loopback_3: "3.3.3.3"

Operation

Plugin operation is split into two stages:

STAGE 1: loading configuration from “configuration_loader” node type - this operation is happening once we instantiate blueprint. Parser is reading “load_from_config” relationship and based on keys in selector “params_list” will import only keys listed in selector to “params” key in node runtime properties.
STAGE 2: this stage is responsible for actual configuration change which is triggered by running “configuration_update” workflow. This workflow takes

Special parameters: params, node_types_to_update, configuration_node_id

params - represent JSON formatted input of configuration which will be sent to “confguration_loader” type. Regular JSON with braces {} can be used or just properly idented string.
node_types_to_update - represent types of the nodes that need to be updated. Thanks to node types as selector, we can do batch processing.
configuration_node_id - represent type of the node which holds configuration. Common error is to use node name instead of type.

Example of parameter file:

params:
"global_config":
"dns": "new-dns-for-all"
"loopback_2": "200.200.200.200"
node_types_to_update: [cloudify.nodes.Cpe]
configuration_node_id: configuration_loader

Once “configuration_workflow” is executed the update interface will be called on updated node instance.

Important

This is very important “connector” between updating node instance runtime properties and actual action which may change configuration on entity that node represents (for instance change DNS entry).

Below is an example of node type with update interface:

cloudify.nodes.Cpe:
    derived_from: cloudify.nodes.Root
    properties:
      params:
        default: {}
      params_list:
        default: {}
    interfaces:
      cloudify.interfaces.lifecycle:
        start:
          implementation: cpe/start.py
          executor: central_deployment_agent
        update:
          implementation: cpe/update.py
          executor: central_deployment_agent

Sample execution of “configuration_update” workflow:

cfy executions start -d test1 -p ./sg-dns-update.yaml configuration_update

In here we are executing “configuration_update” workflow on existing “test1” deployment with parameters captured in “sg-dns-update.yaml” file.

Warning

Configuration DIFF is made only on primary keys. If you have configuration nested under primary key like above: “global_config” is primary key and holds “dns” key - we’ll not only change dns to “new-dns-for-all” but as well remove existing key: ntp: “ntp-global”. If you want to just change DNS and keep NTP intact - you need to provide all “sub-keys” in this data structure:

params:
   "global_config":
    "dns": "new-dns-for-all"
    "ntp": "ntp-global"
  "loopback_2": "200.200.200.200"
node_types_to_update: [cloudify.nodes.Cpe]
configuration_node_id: configuration_loader

STAGE 1 Example

Instantiate blueprint:

cfy install -d test1 -b test1 -i ./deploy_inputs.yaml ./sg-blueprint.yaml

List nodes:

[vagrant@localhost]$ cfy node-instances list
Listing all instances...

Node-instances:
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
|          id          | deployment_id | host_id |    node_id    |  state  | permission |  tenant_name   | created_by |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
| config_holder_6c4wxt |     test1     |         | config_holder | started |    None    | default_tenant |   admin    |
|     cpe1_wfxzsw      |     test1     |         |      cpe1     | started |    None    | default_tenant |   admin    |
|     cpe2_q6n0wf      |     test1     |         |      cpe2     | started |    None    | default_tenant |   admin    |
|     cpe3_vkm558      |     test1     |         |      cpe3     | started |    None    | default_tenant |   admin    |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+

List node instances runtime properties:

[vagrant@localhost]$ cfy node-instance get cpe1_wfxzsw

[vagrant@localhost]$ cfy node-instance get cpe1_wfxzsw
Retrieving node instance cpe1_wfxzsw

Node-instance:
+-------------+---------------+---------+---------+---------+------------+----------------+------------+
|      id     | deployment_id | host_id | node_id |  state  | permission |  tenant_name   | created_by |
+-------------+---------------+---------+---------+---------+------------+----------------+------------+
| cpe1_wfxzsw |     test1     |         |   cpe1  | started |    None    | default_tenant |   admin    |
+-------------+---------------+---------+---------+---------+------------+----------------+------------+

Instance runtime properties:
	params: {'diff_params': ['loopback_1', 'global_config'], 'loopback_1': '1.1.1.1', 'old_params': {'old_params': {}}, 'global_config': {'ntp': 'ntp-global', 'dns': 'dns-global'}}

[vagrant@localhost]$ cfy node-instance get config_holder_6c4wxt

[vagrant@localhost]$ cfy node-instance get config_holder_6c4wxt
Retrieving node instance config_holder_6c4wxt

Node-instance:
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
|          id          | deployment_id | host_id |    node_id    |  state  | permission |  tenant_name   | created_by |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
| config_holder_6c4wxt |     test1     |         | config_holder | started |    None    | default_tenant |   admin    |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+

Instance runtime properties:
	params: {'loopback_3': '3.3.3.3', 'loopback_1': '1.1.1.1', 'loopback_2': '2.2.2.2', 'global_config': {'ntp': 'ntp-global', 'dns': 'dns-global'}}

Stage 2 Example

Execution of “configuration_update” workflow

cfy executions start -d test1 -p ./sg-dns-update.yaml configuration_update

[vagrant@localhost hierarchical_config]$ cfy node-instance get config_holder_6c4wxt
Retrieving node instance config_holder_6c4wxt

Node-instance:
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
|          id          | deployment_id | host_id |    node_id    |  state  | permission |  tenant_name   | created_by |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+
| config_holder_6c4wxt |     test1     |         | config_holder | started |    None    | default_tenant |   admin    |
+----------------------+---------------+---------+---------------+---------+------------+----------------+------------+

Instance runtime properties:
	params: {'loopback_3': '3.3.3.3', 'loopback_1': '1.1.1.1', 'loopback_2': '200.200.200.200', 'global_config': {'dns': 'new-dns-for-all'}}

…notice that NTP is gone (see WARNING above).

[vagrant@localhost hierarchical_config]$ cfy node-instance get cpe2_q6n0wf
Retrieving node instance cpe2_q6n0wf

Node-instance:
+-------------+---------------+---------+---------+---------+------------+----------------+------------+
|      id     | deployment_id | host_id | node_id |  state  | permission |  tenant_name   | created_by |
+-------------+---------------+---------+---------+---------+------------+----------------+------------+
| cpe2_q6n0wf |     test1     |         |   cpe2  | started |    None    | default_tenant |   admin    |
+-------------+---------------+---------+---------+---------+------------+----------------+------------+

Instance runtime properties:
	params: {'diff_params': ['loopback_2', 'global_config'], 'old_params': {'diff_params': ['loopback_2', 'global_config'], 'loopback_2': '2.2.2.2', 'old_params': {}, 'global_config': {'ntp': 'ntp-global', 'dns': 'dns-global'}}, 'loopback_2': '200.200.200.200', 'global_config': {'dns': 'new-dns-for-all'}}

Another example of using configuration plugin alongside terminal plugin can be found here.